Zebex Z-6070 (U) Specifications download pdf (Page 23)

Dual-Laser Omnidirectional Scanner

USER’S MANUAL

Laser Safety

This laser scanner complies with safety standard IEC 60825 for a Class I laser product. It also

complies with CDRH as applicable to a Class IIa laser product. Avoid long term viewing into

direct laser light.

Optical: The use of optical instruments with this product will increase eye hazard. Optical

instruments include binoculars, microscopes and magnifying glasses but do not include eye

glasses worn by the user.

Radiant Energy: It uses a low-power laser diode operating at 650nm in an opto-mechanical

scanner resulting less than 0.7 mW peak output power. In an opto-mechanical scanner, resulting

in less than 3.9µW radiated power as observed through a 7mm aperture and averaged over 10

seconds.

Do not attempt to remove the protective housing of the scanner, as unscanned laser light with a

peak output up to 0.8mW would be accessible inside.

Laser Light Viewer: The scanner window is the only aperture through which laser light may be

observed on this product. A failure of the scanner motor, while the laser diode continues to emit

a laser beam, may cause emission levels to exceed those for safe operation. The scanner has

safeguards to prevent this occurrence. If, however, a stationary laser beam is emitted, the failing

scanner should be disconnected from its power source immediately.

Adjustments: Do not attempt any adjustments or alteration of this product. Do not remove the

protective housing of the scanner. There are no user-serviceable parts inside.

Caution: Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Zebex Z-6070 (U) Specifications Page 23